Winter Storage for Your Rotary Mower
- Remove the mower drive belt and store to prevent hard spots from developing in the belts where it wraps around the pulleys.
- Lubricate all pivot points and grease blade spindle bearing to prevent rusting from condensation build up over winter.
- Drain fuel tank and carburetor or use a fuel stabilizer in the carburetor.
- Clean the bottom of the deck to remove all grass build up. Use a wire brush and a putty knife and remove as much build up as possible then apply a spray on dry film lubricant to prevent corrosion. This will also help prevent future grass build up next season.
Related Posts
Tips for Properly Storing Your Rotary Cutter
8 tips to store your rotary cutter for the winter and help keep your RC in great condition for next year.
Get the Most From Your Groundbreaker® Backhoe
New to the Groundbreaker? Here are six tips for getting the most out of your Groundbreaker backhoe.
How to Clean Your Rotary Cutter
Properly clean your rotary cutter after each use and for storage to extend the life of your equipment. You'll be glad you did!
Tips to Prevent Streaking or Ragged Cut
Always mow when the grass is dry with sharp blades.
Check belt drive to insure there is no slippage and operate at rated blade tip speed.
Adjust the attitude of the mower deck so that...
The Dos and Don’ts of V-Belt Drives
Most of today's tractor mounted rotary lawn mowers are driven by a common V-Belt drive. Here are a few tips to follow when servicing your belt drives.
When replacing A V-belt never pry the belt into...
Mowing Tips
Extremely tall grass should be mowed twice. Raise the mower and cut half the desired height. Cut the second time at the desired height and at 90 degrees to the first pass.
Remember sharp blades...
Gearbox Service and Maintenance
Most of the problems that occur on gearbox drive equipment are due to lack of service and maintenance. Here are a few things that an operator can check before using their equipment.
Always maintain proper oil...
Blade Sharpening
Remove blades and inspect the condition of the attaching hardware. It is a good idea to replace the hardware each time the blades are replaced.
When sharpening blades always wear safety glasses to prevent any...
How to Operate Your Woods® SB-series Snow Blower
http://www.youtube.com/watch?v=EZFLLyF7TQw
Let's talk about how easy it is to attach and operate the Woods SB-series Snow Blower.
The SB series are compatible with CAT 1 and CAT 2 3-point hitches on tractors from 15 to 60 PTO...
Are You Ready for Winter?
https://www.youtube.com/watch?v=H2tWrSX0UYE
Winter is on its way. Are you ready to move snow?
The Woods SB-series Snow Blowers are designed specifically for sub-compact and compact tractors ranging from 15 to 60 PTO horsepower. Working widths range from 54...
