Tech Tips Archives - Woods Equipment

25 Jan

How to Operate Your Woods® SB-series Snow Blower

January 19, 2021
By LisaKRuggles

http://www.youtube.com/watch?v=EZFLLyF7TQw Let's talk about how easy it is to attach and operate the Woods SB-series Snow Blower. The SB series are compatible with CAT 1 and CAT 2 3-point hitches on tractors from 15 to 60 PTO...

19 Jan

Tech Tips

Are You Ready for Winter?

January 19, 2021
By LisaKRuggles

https://www.youtube.com/watch?v=H2tWrSX0UYE Winter is on its way. Are you ready to move snow? The Woods SB-series Snow Blowers are designed specifically for sub-compact and compact tractors ranging from 15 to 60 PTO horsepower. Working widths range from 54...

22 Oct

Tech Tips

How to Clean Your Rotary Cutter

October 22, 2020
By LisaKRuggles

Cleaning Rotary Cutter After Each Use and for Storage To properly clean and maintain your Woods® rotary cutter, we suggest these tips: Cleaning After Each Use Remove large debris from the machine, such as clumps of dirt,...

25 Sep

Tech Tips

Winter Storage for Your Rotary Mower

September 25, 2020
By LisaKRuggles

Remove the mower drive belt and store to prevent hard spots from developing in the belts where it wraps around the pulleys. Lubricate all pivot points and grease blade spindle bearing to prevent rusting...

25 Sep

Tech Tips

Tips to Prevent Streaking or Ragged Cut

September 25, 2020
By LisaKRuggles

Always mow when the grass is dry with sharp blades. Check belt drive to insure there is no slippage and operate at rated blade tip speed. Adjust the attitude of the mower deck so...

25 Sep

Tech Tips

The Dos and Don’ts of V-Belt Drives

September 25, 2020
By LisaKRuggles

Most of today's tractor mounted rotary lawn mowers are driven by a common V-Belt drive. Here are a few tips to follow when servicing your belt drives. When replacing A V-belt never pry the belt into...

31 Jul

Tech Tips

Mowing Tips

September 18, 2020
By IgnitionStudio

Extremely tall grass should be mowed twice. Raise the mower and cut half the desired height. Cut the second time at the desired height and at 90 degrees to the first pass. Remember sharp...

31 Jul

Tech Tips

Gearbox Service and Maintenance

July 31, 2020
By IgnitionStudio

Most of the problems that occur on gearbox drive equipment are due to lack of service and maintenance. Here are a few things that an operator can check before using their equipment. Always maintain proper oil...

31 Jul

Tech Tips

Blade Sharpening

September 18, 2020
By IgnitionStudio

Remove blades and inspect the condition of the attaching hardware. It is a good idea to replace the hardware each time the blades are replaced. When sharpening blades always wear safety glasses to prevent...

Tech Tips

WOODS IS SOCIAL

Facebook

Instagram

Twitter

YouTube

LinkedIn

Tech Tips

WOODS IS SOCIAL

Facebook

Instagram

Twitter

YouTube

LinkedIn

REGISTER FOR WOODS PROMOTIONS! Sign Up Now!